Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

           

123 Street Avenue, City Town, 99999

(123) 555-6789

email@address.com

 

You can set your address, phone number, email and site description in the settings tab.
Link to read me page with more information.

Used Machinery

We've been buying, selling and appraising industrial food processing, packaging and related machinery since 1942. No one has deeper knowledge of industrial food machinery quality and resale value than Cuyler FoodPro. Contact us if you are seeking to buy or sell used food machinery, and let our unsurpassed expertise save you valuable time and money. And make sure you check back here regularly for new, sought-after deals.

Used Food Machinery For Sale

We've been buying, selling and appraising industrial food processing, packaging and related machinery since 1942. No one has deeper knowledge of industrial food machinery quality and resale value than Cuyler FoodPro. 

Contact us if you are seeking to buy or sell used food machinery, and let our unsurpassed expertise save you valuable time and money. And make sure you check back here regularly for new, sought-after deals.


Featured Machinery

 

 

Quadro High Shear In-Line Emulsification and Wet Milling "Colloid" Machine, Model Z5 – Stock #2045

Quadro high shear in-line emulsification and wet milling "colloid" machine, model Z5, serial number 0077, 2011, 20 HP 3/60/230/460, 900 RPM, 3 stage rotors, 3" inlet and discharge, stainless steel product contact parts, previously used on Greek yogurt, s/s base (Stock #2045)

 

Used Equipment For Sale 

S&F 48" Diameter Stainless Steel Accumulation Disk
Model 4800

S&F 48" diameter stainless steel accumulation disk, model 4800, stainless steel top disk, stainless steel frame with painted legs, 1/3 HP gearhead motor drive, stainless steel round bar outer guide (Stock #1628)

Reitz Screw Type Water Blancher
Model TL-36-K2215

Ritz screw type water blancher, model TL-36-K2215, "TLW Series," 36" diameter x 15' long, all stainless steel, spring loaded paddle - pusher discharge with drain screen and re-circulation pump, hinged covers, direct steam injection with low velocity steam diffusers, approx. 50 cubic feet volumetric capacity to centerline of shaft, water volume approx. 117 cubic feet to top of screw, very good condition (Stock #1823)

Interpack Case Taper
Model USA 2324
 

Interpack case taper, model USA 2324,Uniform Semi-Automatic, BB, 23" x 24" maximum case size, serial number TM17407-G009, bottom belt drive, top tape head only installed, adjustable, 1/2 HP3/60/120 VAC drive (Stock #2042)

 

VideoJet Small Character InkJet Printer
Model Excel 100

VideoJet small character InkJet printer, model Excel 100, serial number E96G16002, on stainless steel portable stand, single print head (Stock #2016)

 

VideoJet Small Character Inkjet Printer
Model 170i/AF

VideoJet small character InkJet printer, model 170i/AF, serial number 99120026WD, on painted portable stand, single print head (Stock #2017)

VideoJet Small Character Inkjet Printer
Model 273-ci

VideoJet small character InkJet printer, model 273-ci,  serial number 982300025WD, 2 print heads, on painted portable stand (Stock #2019)

VideoJet Small Character Inkjet Printer
Model 273-ci

VideoJet small character InkJet printer, model 273-ci, ID tag removed, 2 print heads, on painted portable stand (Stock #2020)

 

VideoJet Small Character InkJet Printer
Model 273-AF
 

VideoJet small character InkJet printer, model 273-AF, serial number 031570017WD, 1 print head, on aluminum portable stand, warning light (Stock #2021)

Quadro High Shear In-Line Emulsification and Wet Milling "Colloid" Machine
Model Z5

Quadro high shear in-line emulsification and wet milling "colloid" machine, model Z5, serial number 0078, 2011, 20 HP 3/60/230/460, 900 RPM, 3 stage rotors, 3" inlet and discharge, stainless steel product contact parts, previously used on Greek yogurt, stainless steel base (Stock #2046)

 

Murzan Pneumatic Suction Wand Drum/Tote Unloading System
Model AB-72

Murzan pneumatic suction wand drum/tote unloading system, model AB-72, 3", all 316 stainless steel, portable base, model PI-50 T316 stainless steel pneumatic double diaphragm pump, semi automatic process to unload viscous self leveling products, NEMA 4 stainless steel control enclosure, 3 axis wand control, CIP capable, suitable for: juice concentrates, juices, olives in suspension, diced tomatoes, tomato paste concentrate (with added water), beverage bases, any self-leveling product in drums and totes; excellent condition (Stock #2018)


Pfaudler Rotary Piston Filler
Model RP-21
 

Pfaudler rotary piston filler, model RP-21, serial number 35415, 21 station, 3-3/4" diameter pistons with o-ring and Teflon wear strip, Teflon coated straight sided valve bodies, counter-clockwise rotation, 6' long stainless steel infeed conveyor stub, timing worm/star infeed, set for 401 x 411 cans, all stainless steel product contact parts, stainless steel upper cam, painted steel lower cam, stainless steel shrouded square base design, 2" diameter product intake ports, 3/4" diameter discharge ports, seamer drive sprocket (Stock #1548)

 

Lower Cam for FMC Piston Filler
Model C-100

Lower can for FMC piston filler, model C-100, FMC part numbers C2110430/C2112270, new/never used (Stock #0390)

 
 

APV Plate Type Heat Exchanger
Model SR-35S

APV plate type heat exchanger, model SR-35S, serial number 14696, all stainless steel frame, 2 regeneration blocks with 1-1/2" tri-clamp fittings, approximately 80 titanium plates, tri-clamp fittings (Stock #1727)

Bauer Hydrasieve
Model 553F 7204247
 

Bauer hydrasieve, model 553F 7204247, serial number 40701, 72" wide horizontal fiberglass screen, .060 perforate, 10" inlet, mounted on 36" wide x 72" long x 42" deep mild steel tank with 8" discharge (Stock #1655)

 

Langsenkamp Pulper
Model 67-A "E-Z Adjust"

Langsenkamp pulper, model 67-A "E-Z Adjust", 4" NPT pipe infeed, all stainless steel product contact parts, riveted body assembly, 4 paddle assembly, screen holder assembly, E-Z adjust wheel, open carbon steel painted frame, stainless steel discharge pan with 4" NPT discharge fitting, 10 HP 3/60/230/460 VAC motor, belt drive (Stock #1596)

HKM Stainless Steel Light Duty Paddle Blender

HKM stainless steel light duty paddle blender, approximate dimensions 3' wide x 3' deep x 6' long, estimated working capacity 40 cubic feet, single horizontal shaft, interior paddle assembly with end (bulkhead) scrapers, 12" x 12" bottom slide outlet with air cylinder, all stainless steel construction, requires approximately 1 HP C-face motor for existing gear reduced motor drive (not included) (Stock #1724)

 

APV/Crepaco Positive Displacement Pump
Model 4TS

APV/Crepaco positive displacement pump, model 4TS, size 4, serial number P-3172-96, 2-1/2" tri-clamp inlet and discharge, 7.5 HP gear reduced motor drive, approximately 400 RPM final, stainless steel base (Stock #1767)

Toledo Digital Platform Scale
Model 8142
 

Toledo digital platform scale, model 8142, floor type, 5000 pound capacity, stainless steel 48" x 48" deck, stainless steel digital programable read out head enclosure, serial number 4228825-4RR-N-1000, wash down, model 307 printer (Stock #1644)

 
 

American Can "Canco" Automatic Can Seamer
Model 08

American Can "Canco" automatic can seamer, model 08, serial number 6613, set for 603 x 700 (#10) cans, disk infeed, impact type cover marker (less type holder), atmospheric closure, paddle packer, fixed speed motor drive (Stock #0578)

Angelus Can Seamer Infeed for Model 40-P-MSLF
 

Angelus can seamer infeed for model 40-P-MSLF, stainless steel fabricated, includes chain sprockets and idlers, can guides, no can-no lid actuator; also includes paddle packer for P-series straight line infeed machines (Stock #1842)

 

Key Iso-Flo Vibratory Shaker/Conveyor
Model 421176-1

Key Iso-Flo vibratory shaker/conveyor, model 421176-1, serial number 95-12069, vibratory "distribution shaker" conveyor, all stainless steel construction, 48" wide x 72" long pan with a rigidified stainless steel bed, 65" flared infeed tapering for 24" to the 48" bed width, discharge end has an 18" deep "V" cut bias with "Sure-Lock" manual product diverter, 4" high sidewalls, above bed frame style and motor mount, equipped with "Iso-Drive" vibratory motor, 1995, electrical: 1 HP, 208-230/460V - 3Ph - 60 HZ, excellent condition (Stock #1364)

Angelus Paddle Packer Attachment for Model 60L Steamer

Angelus paddle packer attachment for model 60L steamer, 4 head, no change parts, guard (Stock #1901)

 

Urschel Dicer
Model GK

Urschel dicer, model GK, stainless steel frame, bronze contact parts, 3/8" dice, 2 HP motor drive, can produce crinkle french fry strips from potatoes, hopper infeed, missing chute and some guards (Stock #1797)


Hollymatic Meat Tenderizer
Model AMT.675
 

Hollymatic meat tenderizer, model AMT.675, all stainless steel construction, stainless steel injector, conveyor, needles, guards, castors, suitable for boneless pork, beef, and poultry, 3/60/230/460 VAC (Stock #1825)


Lyco "Easy-Flow" Cooler

Lyco "Easy-Flow” High Speed Particulate Plenum Cooler Tank, 3 zone, Serial PCT091269611, Built 09/2012, suit to cool (stop cook) pasta, rice and other particualer products, capacity to 5,000 pounds per hour, removable wire wedge dewatering screens, missing (3) recirculation pumps, incudes VFD speed controllers for pumps, all stainless steel construction, very good condition, see http://lycomfg.com/equipment/coolers/easy-flow/ for additional information (Stock #2060)


IMG_8531.jpg

Safeline metal detector, PowerPhase Plus, model SL-2000, serial number 27728-01, all stainless steel frame, 2008, 8" x 5-1/2" opening, 6" wide Intralox x 8' conveyor belt, 1-1/2 HP gear reduced motor drive, 3/60/230/460 VAC, stainless steel motor, air blast reject provision, adjustable legs